![]() ![]() Adding Serial Communication Software: As mentioned, Hyperterminal. The best feature of their products, to my viewpoint is that they use HID class which means NO driver installation AND it can operate on all platforms (Linux, MAC, Windows) because this HID class is supported at OS level. Vivid Engineering offers an adapter (USB-ADAPTER) that we have tested with our products. ![]() Figure 5: Hyper Terminal Interface Window. I dont think this is the issue because it works on Hyperterm, but just in case. Windows XP HyperTerminal program connects to an Isolated USB-to-Serial Adapter. Plug the converter into a USB port and follow the instructions that come on the screen. DA-15 serial to USB Hyperterm settings: COM20 Bits per second: 115200 Data bits: 8 Parity: None. This implies microcontroller SW development but as a result, the BOM will be reduced from 1uC + 1 converter to simply 1uCģ/ Some "clever" company like HEXWAX, has developed a range of products including harware + software to ease control/command of environnement : If you are using a USB-Serial converter, it is slightly different. At least, it is if we go by download count. In case you didn’t know, PuTTy is actually the most popular HyperTerminal alternative in the world. That’s pretty much par for the course however, when it comes to Open Source applications. Note that because most adapters use the CDC class, driver installation will be necessary on PC side!!! (not so nice for end user)Ģ/ to reduce the Bill Of Material, use a simple sub-dollar 8bits microcontroller with USB on-chip like PIC18F13K50/PIC18F14K50. This is also, strictly-speaking, a beta program given that the current version number is 0.73. Some utility enable configuration of the some I/Os and registers on this chipĪ small development kit enables immediate development If I can resolve this, I can try next stage, so I would like to hear your solution. So, it is not possible to monitor the ‘scope’ in real time. Build is successful and the LEDs blink as programmed. I use ‘TMS320F28335’ and ‘USB Docking Stn’. Please note also that Hyperterminal has been removed from VISTA &/or Windows Seven.ġ/ using a simple USB UART converter chip like MCP2200 I’m trying to use Simulink for serial communication. If you use another terminal software like Teraterm v4.66 (there are hundreds free terminal SW in internet), it will immediately open the COM PORT !!! In fact it has NOTHING to see with the COM PORT. In some cases, Hyperterminal will simply give the following message : "CANNOT OPEN COM PORT". However, my own trainer's experience is that Hyperterminal has some BIG issues when used together with USB RS232 adapters (COM port emualation in the "bridge" function). There are several ways to do COM PORT emulation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |